Part and Accessories
Find high-quality Parts and Accessories for Vortex Blastair Air Blaster Systems. Our products provide reliable and cost-effective solutions for removing material build-up in silos and hoppers. Furthermore, these systems effectively solve flow problems in cyclones, kilns, and granular storage.
Reliable, efficient and cost-effective material build up removal products, solutions and services.
Staminair® Corporation offers a complete line of accessories for the Vortex Blastair product range. Additionally, we provide a detailed list of available components below.
Refractory Stainless Steel Nozzles
We offer refractory stainless steel nozzles (resistant up to 1200° C) are available in DN100 (4″) or DN150 (6″) to equip the Vortex Blastair air cannon for specific cement kiln applications like riser duct corners and kiln inlet side walls, with tip angles of 0°, 45°, or 90° to effectively achieve build up removal and eliminate concretions.
Blowing Pipes
For easy connection and bolting, Our blowing pipes with ISO standard flanges comes in DN50 (2″), DN100 (4″) and DN150 (6″) as according to the Vortex Blastair size. These 800 mm length blowing pipes are designed for:
Low temperature application pipe in 800 mm steel tube protected by an epoxy paint for rust protection;
High temperature application pipe in 500 mm steel tube, 300 mm stainless steel tip.
Both designs are equipped with a 30 degree bend to deflect and avoid dust and material entering the Vortex Blastair mecanism.
Air FRL Group Unit
The air FL group unit (1′) facilitate continuous internal lubrication of all-metal parts of the Vortex Blastair. An average number of ten (10) Vortex Blastair, located on the same network level can be fitted with one (1) air FRL group unit.
Required low viscosity compressor oil, VG32 type, to be used at all time.
Quick Release Valve (QRV)
The Quick Release Valve (QRV) is designed to maximize air flow at the Vortex Blastair rear chamber. Made of aluminium for durability, its diaphragm can withstand high temperature operations.
Safety Control Unit
The Safety Control Unit allows technical operators to manage the Vortex Blastair safely by performing these tasks:
1. Isolate it pneumatically from its network
2. Safely purge its pressure vessel if required and
3. Control and check operating air pressure at all times.
Safety Suspension Unit
The Safety Suspension Unit supports the Vortex Blastair tank weight and contains vibrations when blasting.
Sequencer Panel
The sequencer panel, automatically organizes the blasting sequence of multiple Vortex Blastair units.
Its friendly design and usage allow for easy sequence changes of manual blasting.
Heat Shield
Available in DN100 and DN150 size.
In addition to accessories, Staminair® Corporation also provides a complete inventory of parts for its Vortex Blastair product range. Parts are readily available and can be shipped worldwide should maintenance be quickly required for a Vortex Blastair unit.
Our complete part list can be downloaded below.
